微型构造表征技术在八面河油田的应用

通过对八面河油田井网密集区及井网稀疏的欠开发区的微构造研究,探讨了微构造表征技术。首先在储层多层次逐级对比的基础上,建立主力油层对比关系;密集井网条件下,则利用钻井资料编制油层顶底微型构造图;对于欠开发地区,通过人机联作自动追踪成图技术,输出2m等值线间隔构造图,建立微构造模型。以微构造模型为基础进行潜力评价,部署关键井寻找优质储量或进行开发动态调整。应用该项技术在八面河油田滚动发现了角15块等断鼻翼部局部高点,增加石油地质储量488×10~4t。     

Hot-Dip Galvanized Sheet Production and Application

1　ＨｉｓｔｏｒｙｏｆＨｏｔ ＤｉｐＧａｌｖａｎｉｚｅｄＳｈｅｅｔＰｒｏ ｄｕｃｔｉｏｎ　　Ｉｔｉｓａｓｔｒｉｋｉｎｇｆａｃｔｔｈａｔｏｎｅｔｅｎｔｈｏｆｉｒｏｎａｎｄｓｔｅｅｌｐｒｏｄｕｃｔｓａｒｅｃｏｒｒｏｄｅｄ .Ｐｅｏｐｌｅｔｒｙｔｈｅｉｒｂｅｓｔｔｏａｖｏｉｄｏｒｒｅｄｕｃｅｔｈｅｃｏｒｒｏｓｉｏｎｏｆｉｒｏｎａｎｄｓｔｅｅｌ.Ｚｉｎｃａｓａｍｅｔａｌｗａｓｆｉｒｓｔｆｏｕｎｄｔｈａｔｉｔｃｏｕｌｄｐｒｏｔｅｃｔｔｈｅｓｔｅｅｌｆｒｏｍｃｏｒｒｏｓｉｏｎｂｙｃｏｒｒｏｓｉｏｎ ｐｒｏｄｕｃｔ…     

油管漏磁探伤工艺与应用

简要介绍了漏磁探伤的基本原理及工艺流程与设备仪器，并对油管的常见损伤缺陷进行了分析。     

Heat transfer mechanism of a swirling impinging jet in a stagnation region

Heat transfer characteristics of a swirling impinging jet have been experimentally examined using a combined particle image velocimetry (PIV) and laser‐induced fluorescence (LIF) technique for simultaneous measurement of velocity and temperature fields. The present study shows that the radial width of the jet stretches with increasing swirl intensity, and that the stretching phenomenon contributes to the maximum local heat transfer coefficient. At the stagnation region, the flow near the heated surface is mixed intermittently by reverse flows toward upstream, and spatial distributions of temperature are correlated with instantaneous velocity vector maps. The dynamic behavior of recirculation zones, attributed to swirl number Sw and impinging distance, mainly determines the turbulent heat transfer at the stagnation region. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 663–673, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10120     

岩盐钻井水溶双井连通开采工艺的研究与推广

文章就全国井矿盐采区多年的开采工艺技术，进行了系统的研究与总结，并提出了岩盐钻井水溶开采双井连通的各种开采工艺及其关键技术，具有很强的适用性和推广价值。     

�غ���׹ܿ���ǿ�ȼ��㼰�ֳ�Ӧ��

对于套管挤毁问题较为严重的油气水井，采用非API标准的特厚壁套管来提高其抗挤强度，是今后预防套管挤毁的重要发展方向。目前，特厚壁套管的抗挤强度计算和尺寸系列尚未形成工业标准，文章提出特厚壁套管的抗挤强度计算方法和尺寸系列，供设计者和厂家参考。API/ISO套管挤毁工作组曾对本文公式进行了测评，结果曼示具有较高的计算精度。大量计算表明，特厚壁套管的抗挤强度大大提高，约为加厚前原套管抗挤强度的1．5～4倍，甚至6倍。最后还介绍了特厚壁套管在中原油田的现场应用情况。     

超微粉石墨层间化合物FeCl3-NiCl2-GICs的制备及电磁性能研究

以微粉石墨为主体材料合成出不同阶结构的FeCl3-NiCl2-GICs.应用XRD、SEM对产物的晶体结构与表面形貌进行分析表征.采用范德保法测量产物在常温常态下的电阻率,用MODEL9600振动磁强计测量GICs在0～7.958×105A/m磁场强度下的磁化强度、磁化率.测量数据表明异类原子FeCl3、NiCl2插入石黑层间后,GICs的电导率增加1.3～2.9倍,其磁性由石墨的抗磁性转变为顺磁性.     

Apple Polyphenol Oxidase Inhibitor(s) from Common Housefly (Musca Domestica L.)

ABSTRACT: A new natural apple polyphenol oxidase (PPO) inhibitor(s) from housefly ( Musca domestica L.) was discovered. Crude inhibitor (s) isolated by buffer extraction, heat treatment, and dialysis from housefly pupae inhibited the activity of apple PPO up to 90% at pH values above 5.0. Inhibition was strictly pH-dependent. The inhibitor(s) was further characterized by employing heat, freezing and thawing, irradiation, pH adjustment, and ultrafiltration studies. The potential PPO inhibitor(s) was stable to heating at 100 °C for 1 h, repeated freezing and thawing, and irradiation. The inhibitor(s) was most stable at pH around 5.0 and least stable at alkaline pH. The PPO inhibition profile of housefly during metamorphosis also was evaluated.     

应用摩擦改进剂提高燃料经济性

介绍了摩擦改进剂的类型及作用机理，比较了不同类型的摩擦改进剂。阐述了应用摩擦改进剂减少边界润滑和混合润滑状态下的摩擦损失，从而提高燃料经济性。     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.